Skip to content

Specifications

Some specs.

Outline

Dimensions in millimetres. The Midge is fixed by one M8 screw through the Ø8.5 hole in the centre of its foot.

Internals

With its tube and wind shield off: the frame on its rods and what it carries, down to the base and the foot.

Midge v2 internals, from the front The Midge v2 rain gauge with its tube and wind shield off, from the front: the frame on its rods, the load cell and the bucket and motor it carries, down to the base and the foot.
Front
Midge v2 internals, from behind The Midge v2 rain gauge with its tube and wind shield off, from behind: the frame on its rods, the load cell and the bucket and motor it carries, down to the base and the foot.
Back
Midge v2 internals, from the left The Midge v2 rain gauge with its tube and wind shield off, from the left: the frame on its rods, the load cell and the bucket and motor it carries, down to the base and the foot.
Left
Midge v2 internals, from the right The Midge v2 rain gauge with its tube and wind shield off, from the right: the frame on its rods, the load cell and the bucket and motor it carries, down to the base and the foot.
Right

From above, and from below lined up with the front:

Midge v2 internals, from above The Midge v2 rain gauge with its tube and wind shield off, from above: the frame on its rods, the load cell and the bucket and motor it carries, down to the base and the foot.
Top
Midge v2 internals, from below The Midge v2 rain gauge with its tube and wind shield off, from below: the frame on its rods, the load cell and the bucket and motor it carries, down to the base and the foot.
Bottom